FOCUS BUYER GUIDE | FG-075 | FOCUS-SPEC-V6-20260916 Planning Merchandise Capacity for Foodservice Cabinets Calculate display quantity from usable space and actual packages. For foodservice cabinets, the decisive issue is appliance access and cleaning. Start with appliance opening and worktop height, then reconcile them with service chase and removable panel. The result should be a merchandise capacity worksheet that a buyer, designer and supplier can review against the same fixture reference. Calculate the appliance access and cleaning Keep display quantity separate from safe load capacity. Start with the real package dimensions, including caps, rims or hanging tabs. Reserve the space needed to pick up and replenish the product rather than filling every visible opening. In this application the fixture serves foodservice equipment and supplies, so the review needs to follow those items through ordinary use. Separate the furniture enclosure from the appliance and its operating requirements. The installation drawing should show how the appliance can be removed for service without dismantling the entire counter. Confirm the cleaning method before choosing exposed joints and cabinet materials. Put service chase into the working record Use service chase as the first check for this capacity review. Write down how it was obtained, which view or component it describes and whether it refers to the complete assembly or one part. Next compare removable panel against the adjoining fixture or service area. If the information changes, update the configuration and the associated a merchandise capacity worksheet together. This makes the decision traceable when the order is reviewed later. Compare modular foodservice run with the alternatives Modular foodservice run is one starting arrangement; equipment base and service counter create different operating conditions. Judge them using appliance access and cleaning, the merchandise and the actual location. Keep the comparison focused on the capacity decision rather than declaring one configuration best for every store. Record an advantage, a limitation and the evidence needed for each option. A change in appliance opening may alter the preferred arrangement even when the customer-facing appearance is similar. Equipment base | Supporting a selected appliance | Check heat, ventilation and removal instructions Service counter | Serving products across a counter | Coordinate customer and staff-side reach Modular foodservice run | Building a connected equipment run | Coordinate module joints, worktops and services Worked planning example For this capacity review of foodservice cabinets, create a project dimension record before selecting a cabinet footprint. The updated source catalog does not contain a matched specialist configuration for this fixture, so the previous assumed size has been withdrawn. Start with record appliance opening for foodservice cabinets and identify the equipment or merchandise that determines the available space. Record the width, overall depth, overall height and service access on the same drawing. Use actual appliance documents where equipment is involved. Keep a separate field for each clearance instead of adding an unverified generic allowance. The resulting record supports a configuration-specific proposal and prevents an unrelated shelving dimension from being carried into this design. Width / depth / height | To project drawing | No default catalog size for this specialist fixture Equipment footprint | Selected equipment documentation | Include access and service connections Configuration | Project-specific | Review selected image with shop drawing Apply the review to foodservice equipment and supplies In a design study, position the chosen foodservice cabinets within the store before finalizing this decision. Check its relationship to customer approach, staff replenishment and the adjacent equipment. Use the supplied reference images to discuss the visible arrangement, then use measured drawings and supplier documents for dimensions and performance. The a merchandise capacity worksheet should identify the selected configuration, the remaining interface decisions and the party responsible for resolving each one. A merchandise trial for this fixture For foodservice cabinets, create the record around appliance access and cleaning. Use three representative packages: the largest, the fastest-moving and the least stable. Test removal of the middle item without displacing its neighbors. Begin with equipment base and note how appliance opening changes when service counter is selected. Then review service chase against the needs of foodservice equipment and supplies. The useful output is: A facing count, replenishment depth and separate requirement for verified safe loading. Keep these four fields together so the project contact can see how one decision affects the others. appliance opening | Equipment base | Record the capacity decision and supporting evidence worktop height | Service counter | Record the capacity decision and supporting evidence service chase | Modular foodservice run | Record the capacity decision and supporting evidence removable panel | Equipment base | Record the capacity decision and supporting evidence A common mistake and its correction Treating a cabinet opening as proof of appliance compatibility can cause this capacity review to fail even when the overall design looks complete. Correct it by bringing appliance opening, worktop height and the operating task onto one annotated view. Photograph or sketch the issue, identify the affected fixture and resolve it before the related drawing or purchase line is approved. Retain the correction with the order so a repeat purchase does not recreate the same problem. BUYER CHECKLIST Record appliance opening for foodservice cabinets Record worktop height for foodservice cabinets Record service chase for foodservice cabinets Record removable panel for foodservice cabinets Attach the a merchandise capacity worksheet Check the selected capacity decision with the responsible project contact Contact: gzfocusdisplay@gmail.com | +86 136 6049 7267