FOCUS BUYER GUIDE | FG-182 | FOCUS-SPEC-V6-20260916
How to Choose the Wood & Metal Fixtures Configuration

Compare the operating task before comparing the appearance. For wood & metal fixtures, the decisive issue is material samples and joints. Start with panel thickness and edge detail, then reconcile them with finish code and connection location. The result should be a configuration comparison that a buyer, designer and supplier can review against the same fixture reference.

Compare the material samples and joints
Use the same merchandise and floor-plan assumptions for every option. Mark what each arrangement includes, what can change and what depends on the adjacent fixture. A configuration is useful only if the daily task can be completed without removing another essential component. In this application the fixture serves coordinated branded displays, so the review needs to follow those items through ordinary use. Separate decorative surface appearance from the underlying material. A wood-grain finish may be laminate or veneer rather than solid timber. Review the metal-to-panel connection and the exposed edges together so the approved sample explains both appearance and construction.


Put edge detail into the working record
Use edge detail as the first check for this configuration review. Write down how it was obtained, which view or component it describes and whether it refers to the complete assembly or one part. Next compare finish code against the adjoining fixture or service area. If the information changes, update the configuration and the associated a configuration comparison together. This makes the decision traceable when the order is reviewed later.


Compare cabinet and shelf combination with the alternatives
Cabinet and shelf combination is one starting arrangement; feature display and metal frame with panels create different operating conditions. Judge them using material samples and joints, the merchandise and the actual location. Keep the comparison focused on the configuration decision rather than declaring one configuration best for every store. Record an advantage, a limitation and the evidence needed for each option. A change in connection location may alter the preferred arrangement even when the customer-facing appearance is similar.
Metal frame with panels | Combining warm panels and exposed framing | Define the join between materials
Cabinet and shelf combination | Combining concealed storage with display | Check both door access and shelf visibility
Feature display | Creating a focal merchandising position | Review its footprint within the whole store

Worked planning example
For this configuration review of custom wood metal fixtures, use reference R02-038-B: 900 × 700 × 1650 mm. Match the selected arrangement and fixing details. Double-sided starter shelving. Steel-and-wood shelving A. This is a catalog configuration to compare with the intended design, not a measurement taken from the image. Keep its family and starter, add-on or accessory role together when planning a run. For this guide, check record panel thickness for wood & metal fixtures and record any changed dimension beside the selected reference. Shelf count, hook rows and cabinet storage describe different features. Final equipment openings, fixing positions, clearances and structural requirements still belong on the approved drawing. A similar appearance alone does not establish identical construction or capacity.
Overall width | 900 mm | Catalog configuration, not a measurement of the image
Overall depth | 700 mm | Do not substitute shelf depth for the complete footprint
Overall height | 1650 mm | Check base, top sign and equipment projections
Catalog variant | R02-038-B · Double-sided starter shelving | Keep the series and starter / add-on role with the dimensions
Display / storage levels | 5 | Count shelves, hook rows and cabinet compartments separately
Construction | steel + wood components | Approve substrate, thickness and structural details
Configuration detail | Match the selected arrangement and fixing details. Double-sided starter shelving. Steel-and-wood shelving A. | Match this reference to the final design and merchandise

Apply the review to coordinated branded displays
In a design study, position the chosen wood & metal fixtures within the store before finalizing this decision. Check its relationship to customer approach, staff replenishment and the adjacent equipment. Use the supplied reference images to discuss the visible arrangement, then use measured drawings and supplier documents for dimensions and performance. The a configuration comparison should identify the selected configuration, the remaining interface decisions and the party responsible for resolving each one.


An option comparison for this fixture
For wood & metal fixtures, create the record around material samples and joints. Draw each option at the same scale. Mark shared components, exposed ends and the direction of replenishment; count the components before comparing the price. Begin with metal frame with panels and note how panel thickness changes when cabinet and shelf combination is selected. Then review finish code against the needs of coordinated branded displays. The useful output is: One selected arrangement, its included parts and one separately priced alternative. Keep these four fields together so the project contact can see how one decision affects the others.
panel thickness | Metal frame with panels | Record the configuration decision and supporting evidence
edge detail | Cabinet and shelf combination | Record the configuration decision and supporting evidence
finish code | Feature display | Record the configuration decision and supporting evidence
connection location | Metal frame with panels | Record the configuration decision and supporting evidence

A common mistake and its correction
Using a finish name as a material specification can cause this configuration review to fail even when the overall design looks complete. Correct it by bringing panel thickness, edge detail and the operating task onto one annotated view. Photograph or sketch the issue, identify the affected fixture and resolve it before the related drawing or purchase line is approved. Retain the correction with the order so a repeat purchase does not recreate the same problem.


BUYER CHECKLIST
Record panel thickness for wood & metal fixtures
Record edge detail for wood & metal fixtures
Record finish code for wood & metal fixtures
Record connection location for wood & metal fixtures
Attach the a configuration comparison
Check the selected configuration decision with the responsible project contact

Contact: gzfocusdisplay@gmail.com | +86 136 6049 7267