An Inspection Checklist for Back Counter Cabinets

Inspect against the released configuration: back counter cabinets

Use the approved drawing, finish sample and purchase scope as the inspection basis. Identify the item and revision before checking dimensions, visible finish, hardware operation, assembly and any ordered accessories. Allocate separate places for fast-moving stock, documents and cleaning supplies. Open shelving gives immediate access but exposes contents; closed storage changes the retrieval and cleaning routine. Coordinate front and back counter depths on the same measured plan.

Four checks for the inspection checklist

Use these checks for reserve stock and staff supplies. Record the value or decision, its evidence and any unresolved point beside the fixture reference.

• clear shelf width · Measure between panels, hinges and other obstructions; the external cabinet width cannot establish the storage opening.
• door swing · Show the door at its working opening angle and check whether staff can pass or refill the cabinet.
• lock location · Confirm the lock can be operated with neighboring shelves and equipment in position.
• staff clearance · Check staff access while the busiest door or drawer is open, using the actual counter arrangement.

Compare the back counter cabinets options

The starting arrangements are Open shelves, Lockable cabinet, Mixed drawer and shelf storage. Compare them for reserve stock and staff supplies using the same inspection checklist. Allocate separate places for fast-moving stock, documents and cleaning supplies. Open shelving gives immediate access but exposes contents; closed storage changes the retrieval and cleaning routine. Coordinate front and back counter depths on the same measured plan.

Worked planning example

Use a project-specific inspection checklist for back counter cabinets. Measure between panels, hinges and other obstructions; the external cabinet width cannot establish the storage opening. Confirm the lock can be operated with neighboring shelves and equipment in position. No verified overall configuration is listed for this application in the current size catalog; obtain a dimensioned drawing rather than borrowing the dimensions of a shelving unit.

Record a useful discrepancy

Describe the actual difference, its location and the relevant requirement. Photograph it with the item reference and suitable scale, then record the agreed corrective action and recheck. Visual inspection is separate from a certified performance test. Check staff access while the busiest door or drawer is open, using the actual counter arrangement.

Prevent this back counter cabinets mistake

Allowing two open doors to collide across the staff aisle. Measure between panels, hinges and other obstructions; the external cabinet width cannot establish the storage opening. Confirm the lock can be operated with neighboring shelves and equipment in position.

What to send with the inspection checklist

Send the selected fixture reference, the marked drawing and the intended use for reserve stock and staff supplies. Include clear shelf width and door swing, then document lock location and staff clearance. State the quantity, destination and any components supplied by others. List alternatives separately so a change of configuration does not silently change the comparison.