Start a Project ↗FC-101 is a snack & candy racks design reference for bagged snacks and confectionery. Review package changes and hook spacing, pack width and hook projection before specifying the configuration.
This is a design reference. Its image does not confirm a tested assembly, an in-stock item or a fixed price. Use the selected catalog configuration and the approved project drawing to define the order.
| Check | What the buyer needs to confirm |
|---|---|
| pack width | Use the widest filled pack rather than the flat printed bag when planning facings. |
| hook projection | Check the complete hook and hanging package projection against the aisle and neighboring display. |
| price rail | Allow for the label holder and make sure the price is visible with the intended stock on the fixture. |
| usable shelf depth | Measure the clear support depth after the front rail and rear obstruction are included. |
Compare snack & candy racks → · Prepare a fixture schedule →
Reference configuration from the updated size catalog. Select a matching series; images illustrate design.
Dimensions in millimetres; valid for the selected catalog configuration. Review the dimension record and configuration scope →. Final production dimensions follow the approved drawing.
Match the selected arrangement and fixing details. Steel supermarket shelving.
| Parameter | Selected configuration | Coordination check |
|---|---|---|
| Overall width | 900 mm | Catalog configuration, not a measurement of the image |
| Overall depth | 410 mm | Do not substitute shelf depth for the complete footprint |
| Overall height | 1600 mm | Check base, top sign and equipment projections |
| Catalog variant | R01-010-A · Single-sided starter shelving | Keep the series and starter / add-on role with the dimensions |
| Catalog component count | Confirm on the selected drawing | Confirm whether the listed count covers one bay, the complete run, shelves or other components |
| Construction | steel | Approve substrate, thickness and structural details |
| Configuration detail | Match the selected arrangement and fixing details. Steel supermarket shelving. | Match this reference to the final design and merchandise |
| Finish | Specified by finish sample | Keep the selected finish with the configuration code |
| Vertical arrangement | Confirm on drawing | Catalog layer spacing is not upright slot pitch |
| Accessories | Select compatible shelves, hooks, lightbox and base cabinets | Accessory dimensions belong to the matching host system |
| Load rating | Confirm for the selected assembly | Confirm shelf span, anchoring and intended merchandise load |
| Equipment and services | Specify equipment footprint and service connections separately | Coordinate appliance, lighting driver and service requirements |
| Packing | Package dimensions and weights to packing design | Product dimensions do not establish packed dimensions |
| Installation | Level, connect and restrain to the approved plan | Confirm floor, wall and access conditions |
Collect representative large and small packs before choosing hooks or shelves. Hanging bags can rotate or overlap labels if spacing is based only on the empty hook. Keep heavier packs from hiding small products and decide where price information will remain visible. Use the widest filled pack rather than the flat printed bag when planning facings. Allow for the label holder and make sure the price is visible with the intended stock on the fixture.
Reference FC-101 identifies the displayed design. Dimensions, materials, load ratings and equipment scope are specified for the agreed configuration.
Starting from R01-010-A. Edit for your site; final specification follows approved drawings.
Review project & inquire →| Parameter | Value or requirement | Buyer check |
|---|---|---|
| Pegboard hooks | Starting configuration | Review the visible design with the fixture schedule |
| Materials & finish | Project-selected | Approve substrate, surface and edge detail |
| Equipment | Separately specified | Confirm models and service requirements |
| Accessories | Itemized in quotation | Count shelves, hooks, handles and sign components |
| Packing | Agreed package schedule | Check access, handling and assembly scope |
| Installation | Defined responsibilities | Confirm local site work and supporting documents |
Measure snack & candy racks: package changes and hook spacing, the four checks to record and the measurement record to prepare before ordering.
Explore →Choose snack & candy racks: package changes and hook spacing, the four checks to record and the configuration comparison to prepare before ordering.
Explore →
Plan snack & candy racks: package changes and hook spacing, the four checks to record and the merchandise capacity worksheet to prepare before ordering.
Explore →Provide pack width, hook projection, price rail, usable shelf depth, the fixture reference and its drawing revision. Use the widest filled pack rather than the flat printed bag when planning facings.
Counting hooks without testing loaded packages. Check the complete hook and hanging package projection against the aisle and neighboring display.
No. It identifies the inputs needed for a configuration review. Dimensions, documented performance, included items, quantities and delivery terms must be confirmed for the selected assembly.
Collect representative large and small packs before choosing hooks or shelves. Hanging bags can rotate or overlap labels if spacing is based only on the empty hook. Keep heavier packs from hiding small products and decide where price information will remain visible.
Review package changes and hook spacing with the actual merchandise and adjacent fixtures. Check removal, replenishment and cleaning while the fixture is stocked.
Use clear internal dimensions and real package sizes to count facings and rows. Geometric display quantity is separate from the assembly’s verified load rating.
| Configuration area | What belongs in the specification | Review point |
|---|---|---|
| Exterior & clear space | pack width, hook projection, price rail, usable shelf depth | Record dimensions, units and the relevant view |
| Construction | Substrate, frame, joints, panels and edges | Connect material choices to the approved drawing |
| Access & hardware | Doors, drawers, locks, handles or open picking | Specify applicable parts for this configuration |
| Lighting & services | Included equipment, cables and access panels | List included items and items supplied by others |
| Merchandise support | Shelf count, spacing and documented loading basis | Check actual package sizes and loading conditions |
| Combination & expansion | Neighboring fixtures, ends, corners and connections | Confirm the complete run or counter arrangement |
| Packing & assembly | Assembled or sectional format, protected dimensions and labels | Check receiving access and installation responsibility |
FC-001 is a gondola shelving design reference for aisle merchandise. Review starter and add-on bays, bay width and overall run length before specifying the configuration.
Reference configuration
900 × 700 × 1650 mm
FC-002 is a gondola shelving design reference for aisle merchandise. Review starter and add-on bays, bay width and overall run length before specifying the configuration.
Reference configuration
900 × 700 × 1650 mm
FC-003 is a gondola shelving design reference for aisle merchandise. Review starter and add-on bays, bay width and overall run length before specifying the configuration.
Reference configuration
900 × 700 × 1650 mm
FC-004 is a gondola shelving design reference for aisle merchandise. Review starter and add-on bays, bay width and overall run length before specifying the configuration.
Reference configuration
900 × 700 × 1650 mm
Match the structure, visible finish and cleaning requirements to the way each display will be used.
Read the complete process →
Define what is checked, how it is recorded and what must be closed before shipment.
Read the complete process →Plan protection, package codes and site assembly as part of the fixture design.
Read the complete process →Share the cabinet type, dimensions, merchandise and quantity. We will review display, storage and combination requirements for your quotation.
Start with a fixture reference, a floor plan or a description of the store you want to create.
Browse fixtures →
Open WhatsApp ↗