Start a Project ↗FC-119 is a preparation cabinets design reference for preparation tools and supplies. Review worktop and utility coordination, finished height and worktop thickness before specifying the configuration.
This is a design reference. Its image does not confirm a tested assembly, an in-stock item or a fixed price. Use the selected catalog configuration and the approved project drawing to define the order.
| Check | What the buyer needs to confirm |
|---|---|
| finished height | Measure the finished floor and worktop surface together; adjustable feet and top build-up affect the result. |
| worktop thickness | Identify the actual top material, thickness and edge condition on the section drawing. |
| backsplash | Show wall junctions, backsplash height and how the joint is cleaned in the intended use. |
| service cavity | Leave a documented route for site services and maintenance without cutting structural members on site. |
Compare preparation cabinets → · Prepare a fixture schedule →
Project-specific configuration; dimensional drawing required.
Dimensions in millimetres; valid for the selected catalog configuration. Review the dimension record and configuration scope →. Final production dimensions follow the approved drawing.
The supplied dimension catalog does not define this specialist fixture. Set its size from the equipment layout and approved shop drawing.
| Parameter | Selected configuration | Coordination check |
|---|---|---|
| Overall width | To project drawing | Catalog configuration, not a measurement of the image |
| Overall depth | To project drawing | Do not substitute shelf depth for the complete footprint |
| Overall height | To project drawing | Check base, top sign and equipment projections |
| Catalog variant | Custom configuration | Keep the series and starter / add-on role with the dimensions |
| Catalog component count | Confirm on the selected drawing | Confirm whether the listed count covers one bay, the complete run, shelves or other components |
| Construction | Specify substrate, surface and structural support in the project drawing | Approve substrate, thickness and structural details |
| Configuration detail | The supplied dimension catalog does not define this specialist fixture. Set its size from the equipment layout and approved shop drawing. | Match this reference to the final design and merchandise |
| Finish | Approve finish sample | Keep the selected finish with the configuration code |
| Vertical arrangement | Confirm on drawing | Catalog layer spacing is not upright slot pitch |
| Accessories | Select compatible shelves, hooks, lightbox and base cabinets | Accessory dimensions belong to the matching host system |
| Load rating | Confirm for the selected assembly | Confirm shelf span, anchoring and intended merchandise load |
| Equipment and services | Specify equipment footprint and service connections separately | Coordinate appliance, lighting driver and service requirements |
| Packing | Package dimensions and weights to packing design | Product dimensions do not establish packed dimensions |
| Installation | Level, connect and restrain to the approved plan | Confirm floor, wall and access conditions |
Record cabinet body height and finished worktop height as separate dimensions. Include feet, plinths and worktop build-up before comparing drawings. A continuous worktop across multiple cabinets needs a coordinated joint and support plan, especially around equipment openings. Measure the finished floor and worktop surface together; adjustable feet and top build-up affect the result. Show wall junctions, backsplash height and how the joint is cleaned in the intended use.
Reference FC-119 identifies the displayed design. Dimensions, materials, load ratings and equipment scope are specified for the agreed configuration.
Enter dimensions when available, or leave them blank for a drawing-based review.
Review project & inquire →| Parameter | Value or requirement | Buyer check |
|---|---|---|
| Closed base cabinet | Starting configuration | Review the visible design with the fixture schedule |
| Materials & finish | Project-selected | Approve substrate, surface and edge detail |
| Equipment | Separately specified | Confirm models and service requirements |
| Accessories | Itemized in quotation | Count shelves, hooks, handles and sign components |
| Packing | Agreed package schedule | Check access, handling and assembly scope |
| Installation | Defined responsibilities | Confirm local site work and supporting documents |
Measure preparation cabinets: worktop and utility coordination, the four checks to record and the measurement record to prepare before ordering.
Explore →
Choose preparation cabinets: worktop and utility coordination, the four checks to record and the configuration comparison to prepare before ordering.
Explore →Plan preparation cabinets: worktop and utility coordination, the four checks to record and the merchandise capacity worksheet to prepare before ordering.
Explore →Provide finished height, worktop thickness, backsplash, service cavity, the fixture reference and its drawing revision. Measure the finished floor and worktop surface together; adjustable feet and top build-up affect the result.
Comparing body height with finished counter height. Identify the actual top material, thickness and edge condition on the section drawing.
No. It identifies the inputs needed for a configuration review. Dimensions, documented performance, included items, quantities and delivery terms must be confirmed for the selected assembly.
Record cabinet body height and finished worktop height as separate dimensions. Include feet, plinths and worktop build-up before comparing drawings. A continuous worktop across multiple cabinets needs a coordinated joint and support plan, especially around equipment openings.
Review worktop and utility coordination with the actual merchandise and adjacent fixtures. Check removal, replenishment and cleaning while the fixture is stocked.
Use clear internal dimensions and real package sizes to count facings and rows. Geometric display quantity is separate from the assembly’s verified load rating.
| Configuration area | What belongs in the specification | Review point |
|---|---|---|
| Exterior & clear space | finished height, worktop thickness, backsplash, service cavity | Record dimensions, units and the relevant view |
| Construction | Substrate, frame, joints, panels and edges | Connect material choices to the approved drawing |
| Access & hardware | Doors, drawers, locks, handles or open picking | Specify applicable parts for this configuration |
| Lighting & services | Included equipment, cables and access panels | List included items and items supplied by others |
| Merchandise support | Shelf count, spacing and documented loading basis | Check actual package sizes and loading conditions |
| Combination & expansion | Neighboring fixtures, ends, corners and connections | Confirm the complete run or counter arrangement |
| Packing & assembly | Assembled or sectional format, protected dimensions and labels | Check receiving access and installation responsibility |
FC-039 is a foodservice cabinets design reference for foodservice equipment and supplies. Review appliance access and cleaning, appliance opening and worktop height before specifying the configuration.
Reference configuration
Made to project dimensions
FC-041 is a coffee & beverage counters design reference for coffee machines and beverage service. Review equipment interfaces, machine footprint and working weight before specifying the configuration.
Reference configuration
Made to project dimensions
FC-042 is a cup dispenser cabinets design reference for cups and lids. Review dispenser fit and replenishment, cup rim diameter and dispenser length before specifying the configuration.
Reference configuration
Made to project dimensions
FC-043 is a waste & condiment cabinets design reference for bins and condiment supplies. Review refilling and waste removal, bin dimensions and removal clearance before specifying the configuration.
Reference configuration
Made to project dimensions
Match the structure, visible finish and cleaning requirements to the way each display will be used.
Read the complete process →
Define what is checked, how it is recorded and what must be closed before shipment.
Read the complete process →Plan protection, package codes and site assembly as part of the fixture design.
Read the complete process →Share the cabinet type, dimensions, merchandise and quantity. We will review display, storage and combination requirements for your quotation.
Start with a fixture reference, a floor plan or a description of the store you want to create.
Browse fixtures →
Open WhatsApp ↗