Start a Project ↗
FIXTURE SYSTEMS
Check the corner on the floor plan with both neighboring runs installed. A nominal corner size does not reveal how much of the back shelf is reachable. Mark the turning direction and the transition between the two runs before deciding whether a round or angular unit is appropriate.
Check the corner on the floor plan with both neighboring runs installed. A nominal corner size does not reveal how much of the back shelf is reachable. Mark the turning direction and the transition between the two runs before deciding whether a round or angular unit is appropriate.
Ordering a left-hand corner for a right-hand transition is a common source of specification changes.
| Configuration | Primary check | Operating consideration |
|---|---|---|
| Quarter-round shelf | outer radius | corner access |
| Angular connector | inside opening | corner access |
| Independent corner cabinet | shelf reach | corner access |
Project-specific configuration; dimensional drawing required.
Dimensions in millimetres; valid for the selected catalog configuration. Review the dimension record and configuration scope →. Final production dimensions follow the approved drawing.
The supplied dimension catalog does not define this specialist fixture. Set its size from the equipment layout and approved shop drawing.
| Parameter | Selected configuration | Coordination check |
|---|---|---|
| Catalog variant | Custom configuration | Keep the series and starter / add-on role with the dimensions |
| Catalog component count | Confirm on the selected drawing | Confirm whether the listed count covers one bay, the complete run, shelves or other components |
| Construction | Specify substrate, surface and structural support in the project drawing | Approve substrate, thickness and structural details |
| Configuration detail | The supplied dimension catalog does not define this specialist fixture. Set its size from the equipment layout and approved shop drawing. | Match this reference to the final design and merchandise |
| Finish | Approve finish sample | Keep the selected finish with the configuration code |
4 results
FC-018 is a corner shelving design reference for merchandise at changes of direction. Review corner access, outer radius and inside opening before specifying the configuration.
Reference configuration
Made to project dimensions
FC-019 is a corner shelving design reference for merchandise at changes of direction. Review corner access, outer radius and inside opening before specifying the configuration.
Reference configuration
Made to project dimensions
FC-128 is a corner shelving design reference for merchandise at changes of direction. Review corner access, outer radius and inside opening before specifying the configuration.
Reference configuration
Made to project dimensions
FC-155 is a corner shelving design reference for merchandise at changes of direction. Review corner access, outer radius and inside opening before specifying the configuration.
Reference configuration
Made to project dimensions
| Check | What the buyer needs to confirm |
|---|---|
| outer radius | Draw the complete external curve or corner outline in plan, including signs and stock projection. |
| inside opening | Check the clear inner opening against the staff or customer approach to the corner. |
| shelf reach | Try picking and replenishing the farthest position with representative merchandise. |
| adjacent run depth | Match the corner geometry to the adjoining run depth and check for unusable gaps or conflicting supports. |
Measure corner shelving: corner access, the four checks to record and the measurement record to prepare before ordering.
Explore →Choose corner shelving: corner access, the four checks to record and the configuration comparison to prepare before ordering.
Explore →Plan corner shelving: corner access, the four checks to record and the merchandise capacity worksheet to prepare before ordering.
Explore →Provide outer radius, inside opening, shelf reach, adjacent run depth, the fixture reference and its drawing revision. Draw the complete external curve or corner outline in plan, including signs and stock projection.
Ordering a left-hand corner for a right-hand transition. Check the clear inner opening against the staff or customer approach to the corner.
No. It identifies the inputs needed for a configuration review. Dimensions, documented performance, included items, quantities and delivery terms must be confirmed for the selected assembly.
Match the structure, visible finish and cleaning requirements to the way each display will be used.
Read the complete process →
Define what is checked, how it is recorded and what must be closed before shipment.
Read the complete process →Plan protection, package codes and site assembly as part of the fixture design.
Read the complete process →
Explore every supplied view in store collection 01. Review the fixture arrangement, material direction and service areas as a design reference.
Explore this store →
Explore every supplied view in store collection 02. Review the fixture arrangement, material direction and service areas as a design reference.
Explore this store →
Explore every supplied view in store collection 03. Review the fixture arrangement, material direction and service areas as a design reference.
Explore this store →Share the cabinet type, dimensions, merchandise and quantity. We will review display, storage and combination requirements for your quotation.
Start with a fixture reference, a floor plan or a description of the store you want to create.
Browse fixtures →
Open WhatsApp ↗