Start a Project ↗
FIXTURE SYSTEMS
Cup volume alone cannot confirm dispenser fit. Check the rim diameter, stack behavior and the selected dispenser model. On the cabinet drawing, show the installation angle and the space behind the panel so the dispenser can be loaded and removed without interference.
Cup volume alone cannot confirm dispenser fit. Check the rim diameter, stack behavior and the selected dispenser model. On the cabinet drawing, show the installation angle and the space behind the panel so the dispenser can be loaded and removed without interference.
Equating cup volume with dispenser opening size is a common source of specification changes.
| Configuration | Primary check | Operating consideration |
|---|---|---|
| Front dispenser cabinet | cup rim diameter | dispenser fit and replenishment |
| Worktop dispenser module | dispenser length | dispenser fit and replenishment |
| Cup and lid tower | cutout size | dispenser fit and replenishment |
Project-specific configuration; dimensional drawing required.
Dimensions in millimetres; valid for the selected catalog configuration. Review the dimension record and configuration scope →. Final production dimensions follow the approved drawing.
The supplied dimension catalog does not define this specialist fixture. Set its size from the equipment layout and approved shop drawing.
| Parameter | Selected configuration | Coordination check |
|---|---|---|
| Catalog variant | Custom configuration | Keep the series and starter / add-on role with the dimensions |
| Catalog component count | Confirm on the selected drawing | Confirm whether the listed count covers one bay, the complete run, shelves or other components |
| Construction | Specify substrate, surface and structural support in the project drawing | Approve substrate, thickness and structural details |
| Configuration detail | The supplied dimension catalog does not define this specialist fixture. Set its size from the equipment layout and approved shop drawing. | Match this reference to the final design and merchandise |
| Finish | Approve finish sample | Keep the selected finish with the configuration code |
4 results
FC-042 is a cup dispenser cabinets design reference for cups and lids. Review dispenser fit and replenishment, cup rim diameter and dispenser length before specifying the configuration.
Reference configuration
Made to project dimensions
FC-114 is a cup dispenser cabinets design reference for cups and lids. Review dispenser fit and replenishment, cup rim diameter and dispenser length before specifying the configuration.
Reference configuration
Made to project dimensions
FC-115 is a cup dispenser cabinets design reference for cups and lids. Review dispenser fit and replenishment, cup rim diameter and dispenser length before specifying the configuration.
Reference configuration
Made to project dimensions
FC-116 is a cup dispenser cabinets design reference for cups and lids. Review dispenser fit and replenishment, cup rim diameter and dispenser length before specifying the configuration.
Reference configuration
Made to project dimensions
| Check | What the buyer needs to confirm |
|---|---|
| cup rim diameter | Check the range of cup rim sizes accepted by the selected dispenser using actual sample cups. |
| dispenser length | Allow for the dispenser body behind the face, plus the space needed for removal. |
| cutout size | Use the dispenser template for the opening and fixing pattern instead of the cup diameter. |
| refill clearance | Trace the full sleeve refill movement with adjacent equipment and cupboard doors in position. |
Compare cup dispenser cabinets → · Prepare a fixture schedule →
Measure cup dispenser cabinets: dispenser fit and replenishment, the four checks to record and the measurement record to prepare before ordering.
Explore →Choose cup dispenser cabinets: dispenser fit and replenishment, the four checks to record and the configuration comparison to prepare before ordering.
Explore →Plan cup dispenser cabinets: dispenser fit and replenishment, the four checks to record and the merchandise capacity worksheet to prepare before ordering.
Explore →Provide cup rim diameter, dispenser length, cutout size, refill clearance, the fixture reference and its drawing revision. Check the range of cup rim sizes accepted by the selected dispenser using actual sample cups.
Equating cup volume with dispenser opening size. Allow for the dispenser body behind the face, plus the space needed for removal.
No. It identifies the inputs needed for a configuration review. Dimensions, documented performance, included items, quantities and delivery terms must be confirmed for the selected assembly.
Match the structure, visible finish and cleaning requirements to the way each display will be used.
Read the complete process →
Define what is checked, how it is recorded and what must be closed before shipment.
Read the complete process →Plan protection, package codes and site assembly as part of the fixture design.
Read the complete process →
Explore every supplied view in store collection 01. Review the fixture arrangement, material direction and service areas as a design reference.
Explore this store →
Explore every supplied view in store collection 02. Review the fixture arrangement, material direction and service areas as a design reference.
Explore this store →
Explore every supplied view in store collection 03. Review the fixture arrangement, material direction and service areas as a design reference.
Explore this store →Share the cabinet type, dimensions, merchandise and quantity. We will review display, storage and combination requirements for your quotation.
Start with a fixture reference, a floor plan or a description of the store you want to create.
Browse fixtures →
Open WhatsApp ↗